Surge Tank + Fuel System Assembly Upgrade for Ford Mustang (2011+)
Lease for as low as $/week
Learn More
Fueled By AI
FBA FS1000-MGT
Ships Direct from Manufacturer
Share:
)
PREORDER NOW - SHIPPING EARLY 2021
After hundreds of hours of design, engineering & real-world testing, we are proud to announce the FS1000-MGT drop-in fuel system upgrade for the Ford Mustang 2011+(S197 & S550) which now offers surge protection right down to 5% fuel tank capacity and eliminates the requirement or need for an external surge tank for street & track driven applications.
SPECIFICATIONS & FEATURES
Bulkhead Design: We&lsquove eliminated the need for 90-degree external fuel hose adapter fittings and simply incorporated a 90-degree thread profile for the Supply & Return ports directly into the bulkhead
Larger Floater Valves: The FS1000-MGT features not only 100% larger fuel floater valves over the OEM fuel pump module but 4 valves versus the 1 valve included in the OEM design) which significantly reduces the time required to re-fill the bucket by 300%.
Venturi Pump: The FS1000-MGT also includes a Venturi Pump. The Venturi Pump was developed using leading CFD modeling software and techniques (200 data points and 90 hours of continuous simulations) and the result is a Venturi Pump which is able to generate enough vacuum to pull through more than 200lhr of fuel into the bucket which will ensure that the fuel pumps are submerged at all times so there is no possibility of fuel starvation or fuel surge.
Plug & Play? While the drop-in module isn&lsquot inPlug & Playin per se, the installation can be completed in a matter of hours and will depend on whether the fuel system is set up as a return or non-return system.
Cost Savings: We&lsquove determined that the FS1000-MGT offers estimated savings of between $2,500-$3,500; the costs associated with the installation of a surge tank (fuel lines, fuel fittings, and labor).
Do I Need to Upgrade The Fuel Lines, Fuel Pressure Regulator or Fuel Rail?
a) Fuel Lines:
Non-Return System: The factory fuel supply line is sufficient to support the flow & output of compatible fuel pumps (Walbro 255, 460, and 520 fuel pumps); please note, an external fuel pressure regulator MUST be installed and a new fuel pressure regulator return fuel line installed between the regulator and the FS1000-MGT fuel pump module (-6AN recommended)
Return System: The factory fuel supply is sufficient to support the flow & output of the compatible fuel pumps HOWEVER the fuel rail MUST be upgraded and a return fuel line installed (-6AN return line recommended).
b) Fuel Rail:
Non-Return System: Testing has revealed that the factory fuel lines and fuel rail are more than sufficient to support the fuel volume without excessive pressurization.
Return System: Yes, the factory fuel rail MUST be upgraded.
c) Fuel Pressure Regulator:
Yes -The OEM fuel regulator is far too small must be upgraded. Request- inFuel Pressure Regulatorin & inFuel Rail Adapter Kitin
FORD MUSTANG (2011+) DROP-IN FUEL SYSTEM Special Features:
Quiet Operation- Specially molded Viton fuel pump noise dampener inserts significantly reduce fuel pump vibration to ensure you have a peaceful in-cabin experience
- Perfect fuel pressure control (staged fuel pump operation) & fuel pressure stability due to our design protected 2-to-1 internal fuel pump manifold.
- Zero fuel vapor loss and Zero smell GUARANTEED due to the anodizing process and materials used
- Precision machined from aerospace-grade 6061-T6 billet aluminum & lightweight fuel bucket is designed using best practice engineering principles and stress-tested to ensure safety for all motorsport applications.
- Floater valves designed to trap fuel in the fuel bucket
- Venturi (pump) tube engineered specifically for the Holden VE & VF models.
- Twin Walbro 520 Fuel Pumps:
- Unleaded Fuel: 1300hp atw @ 90psi fuel pressure (13.5v-14v)
- Ethanol Fuel (e85): 1100hp atw @ 90psi fuel pressure (13.5v-14v)
- WALBRO 460 AND WALBRO 520 FUEL PUMPS: PUMPS ARE NOT INCLUDED IN THIS PACKAGE
INSTALLATION ADVICE:
- OEM Wideband Sensor is recommended
- Aftermarket tune is necessary to ensure correct AFR&lsquos and optimal performance
- Wiring harness NOT provided and MUST be wired by professional & certified automotive electrician
Package includes the following items: Requires Assembly (estimated assembly time 30 minutes; assembly guide supplied)in
- FS1000-MGT bulkhead (machined from aircraft grade 6061-T6 billet aluminum)
- Billet(6061-T6) twin (2) fuel pump bracket (includes stainless steel fasteners and Viton rubber insert/s)
- Two (2) billet (6061-T6) 3/8 push-lock fuel pump adapter fittings
- Billet (6061-T6) fuel pump manifold
- Billet (6061-T6) Venturi inlet adapter
- Billet (6061-T6) Venturi (pump) tube
- Billet two (2) piece fuel bucket (machined from 6061-T6 grade billet aluminum)
- Bucket (POM) bottom plate with four (4) injection molded (POM) floater valves
- Viton rubber o-rings included
- Fueled By AI six (6) way male electrical connector with two (2) female connectors and 12 pins
- E85 compatible fuel pump/bulkhead hose
- Two (2) stainless steel Aftermarket Industries 200 micron fuel filters.
- Fuel level sender NOT included - OEM sender to be attached to FS1000-MGT module as per illustrations.
- Fuel pumps are NOT included.
*Note: Fuel Pressure Regulator and Fuel Pumps ARE NOT INCLUDED in this package and can be added to your order.
*These products must be correctly fitted by inCertified Installerin workshops and partners. Aftermarket Industries is not liable for personal injury, death, or for any damage whatsoever arising from any accident or incident where these conditions are not satisfied.
*It is your responsibility to ensure that the Product is sufficient and suitable for your purposes and meet your individual requirements. We do not warrant that the Products will meet your individual requirements. You acknowledge that the Products are standard and not made bespoke to fit any particular requirements that you may have.
Returns Policy
--PLEASE NOTE: MOST ORDERS ARE SUBJECT TO RESTOCK OR CANCELATION FEE. PLEASE CALL OUR OFFICE FOR DETAILS AND EXCEPTIONS-- You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
If you need to return an item, simply login to your account, view the order using the 'Complete Orders' link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.
Shipping
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
